Heavy-duty hinge M237.3L stainless steel 1.4405 form 2A 120x60mm matt blasted
| Form | 2A |
|---|---|
| l1 [mm] | 120 |
| l2 [mm] | 60 |
| d1 [mm] | - |
| d2 [mm] | 8,3 |
| d3 [mm] | 8 |
| d4+0,5 3) [mm] | - |
| h1 [mm] | 16 |
| h2 [mm] | 8 |
| h3 [mm] | 8,5 |
| h4 [mm] | 17 |
| h5 [mm] | 3 |
| l3 [mm] | 56 |
| l4 [mm] | 56 |
| m1 [mm] | 45 |
| m2 [mm] | 36 |
| m3 [mm] | 22,5 |
| m4 [mm] | - |
| m5 [mm] | - |
| FA1) [N] | 8000 |
| FR2) [N] | 10000 |
| Gewicht [g] | 410 |
Pre zobrazenie cien sa prosím
prihláste
.
Material: Stainless Steel 1.4405 martensite (C1), matt blasted or plastic coated black RAL 9005, textured finish. Pin: Stainless Steel 1.4112.
This non-detachable hinges with increased strength are extended on one side or two sides. With countersunk holes for screws DIN 7991. The swivelling range is 180°.
Type 1A: extended on one side, with sunkholes.
Type 1B: extended on one side, with sunkholes and centering guides.
Type 2A: extended on both sides, with sunkholes.
Type 2B: extended on both sides, with sunkholes and centering guides.
1) Max. axial force.
2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability.
3) Recommended recording diameter of the centering guide.