Upínacie púzdra MSM-N, nerez, diera 10mm
| d [mm] | 10 |
|---|---|
| D [mm] | 16 |
| D1 [mm] | 28 |
| L [mm] | 24,0 |
| L1 [mm] | 14 |
| L2 [mm] | 28,0 |
| Transmissible Torque T [Nm] | 23 |
| Transmissible Axial Force Fax [k N] | 4,4 |
| PW [N/mm²] | 90 |
| PN [N/mm²] | 70 |
| Bolts DIN 912 No. of [pcs] | 3 |
| Size | M4 x 8 |
| M No. [Nm] | 2,7 |
| Weight [kg] | 0,05 |
Pre zobrazenie cien sa prosím
prihláste
.
Material: Stainless steel 1.4305 (AISI 303).
Concentricity: about 0,02 mm.
Tolerance: Shaft k6-h10, Hub H8.
Mounting: The bush is mounted quickly. Just place the bush inside the hub and push both onto the shaft. Fasten with Allen key.
Demounting: Remove tensioning screws. Put screws in forcing thread and fasten them until the bush is pressed off.
MN = transmittable torque at load of 0. If the screws are fastened with Manz.
Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz.
Manz = required fastening torque for the screws.
The dimensions refer to bushes before assembly.