Upínacia sada COM-B, diera 10mm
| d [mm] | 10 |
|---|---|
| D [mm] | 16 |
| L [mm] | 26 |
| A [mm] | 23 |
| L1 [mm] | 14 |
| L2 [mm] | 30 |
| D1 [mm] | 28 |
| Transmissible Torque T [Nm] | 48 |
| Transmissible Axial Force Fax [k N] | 10 |
| Pw [N/mm²] | 179 |
| Surface Pressure Hub P [N/mm²] | 112 |
| Bolt Size M [DIN 912, 12.9] | 4 x M4 |
| Tightening Torque TA [Nm] | 5 |
| Weight [kg] | 0,07 |
Pre zobrazenie cien sa prosím
prihláste
.
Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking.
Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm.
Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps.
Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released.
Ts - Fastening Torque
T - Transmittable Torque
F - Transmittable Axial Force
P - Surface Pressure onto Hub