Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 18mm module 3.5 16 teeth 1:1 version 30R
| d [mm] | 18 h6 |
|---|---|
| D [mm] | 33 |
| E1 [mm] | 108 |
| E2 [mm] | 54 |
| E3 [mm] | 85 |
| HGes [mm] | 65,7 |
| HM [mm] | 35 |
| LE [mm] | 135 |
| LW [mm] | 45 |
| r [mm] | 16 |
| s [mm] | 11 |
| T [mm] | 9 |
| Modul | 3,5 |
| zul. MD [Ncm] | 440 |
| Gewicht [g] | 1680 |
Pre zobrazenie cien sa prosím
prihláste
.
Material: Housing from zinc die-cast ZnAI4Cu1.
Shafts made from stainless steel 1.4301 (AISI 304), dismountable.
Bevel gears from polyacetal resin, injection-moulded.
• Open angular gear drive, ratio 1:1.
• Suitable for lower torques and intermittend use.
• Shafts running directly in the self-lubricating housing material.
• Easy to mount and maintenance-free.
• Number of teeth: 16/16.
• Shaft angle: 90º.
• Temperature range: - 20°C to +100º C.
Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the right side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely.