Kužeľové koleso, modul 3, 16z, i=2,5:1, oceľ
| Transmission [i] | 2,5:1 (16/40) |
|---|---|
| Module | 3 |
| No. of Teeth | 16 |
| da [mm] | 53,8 |
| d [mm] | 48 |
| ND [mm] | 40 |
| NL [mm] | 13,6 |
| L1 [mm] | 37 |
| L [mm] | 38,8 |
| S [mm] | 16,1 |
| b [mm] | 25 |
| BH7 [mm] | 15 |
| E [mm] | 75 |
| Admissible MD [Nm] | 9,0 |
| Weight [g] | 310 |
| Corresponding Counter Wheel [Article-No.] | 36146500 |
Pre zobrazenie cien sa prosím
prihláste
.
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.
Tooth quality 8 modelled on DIN 3967 (from module 2).
With crowned, milled teeth. Not hardened – not lapped.
Shaft angle = 90º.
The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.