Kužeľové koleso, modul 1, 15z, i=3:1, oceľ
| Transmission [i] | 3:1 (15/45) |
|---|---|
| Module | 1 |
| No. of Teeth | 15 |
| da [mm] | 17,7 |
| d [mm] | 15 |
| ND [mm] | 13 |
| NL [mm] | 9,2 |
| L1 [mm] | 16 |
| L [mm] | 16,5 |
| S [mm] | 10,0 |
| b [mm] | 7,1 |
| BH7 [mm] | 5 |
| E [mm] | 32 |
| Admissible MD [Nm] | 0,086 |
| Weight [g] | 14 |
| Corresponding Counter Wheel [Article-No.] | 36057700 |
Pre zobrazenie cien sa prosím
prihláste
.
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.
Tooth quality 8 modelled on DIN 3967 (from module 2).
Up to module 5 with crowned, milled teeth.
From module 6 with planed teeth. Not hardened – not lapped.
Shaft angle = 90º.
The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.