Klin. remeň, profil A (13), refer. dĺžka 1480mm
| Profile | A (13) |
|---|---|
| Datum Length [mm] | 1480 |
Material: Material: Rubber Chloroprene. Tensile members from polyester.
Completely covered with polyamide textile.
Classical: These belts in regular shape and quality are very flexible. The use is declining. In most cases, they can be replaced by narrow v-belts with higher power transmission.
Maintenance required: After running in and prolonged use, retensioning is necessary.
Use: Theese V-belts are suitable for classical force-fitting drive systems at normal conditions. Delivery for set use on request.
Operating temperatur: -20° to +100°C.
Antistatic according to ISO 1813.
Wedge angle approx. 38°.
Width b = 13 mm.
Height h = 8 mm.
Width u = 7.5 mm.
Smallest medium pulley diametre = 75 mm.
Weight per Meter 0.109 kg.
Inside Length = Datum Length - 30 mm
Outside Length = Inside Length + 50 mm
Important:
During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request.